Initracing was pleased to be part of a special event at Silverstone in 2013 where former McLaren teammates Mika Hakkinen and David Coulthard were reunited to drive some of their former F1 cars. Also present were some other well known celebrities !!
Enjoy…http://www.youtube.com/watch?v=UYzHvQfdTVo
… View Mika Hakkinen reunited with his MP4-13 at Sliverstone 2013.
Initracing was pleased to support McLaren & Nick Heidfeld at Goodwood 2013 with the MP4-13
… View McLaren MP4-13 at Goodwood 2013.
This Lotus Twin Cam billeted bottom alternator bracket, is for a modern race alternator and is billeted from HE15 aluminium giving this bracket lightness and strength; giving you the best performance. This bracket is also fitted with rubber bushes for vibration damping, which protects the alternator and stops the strap from breaking.
… View Billeted bottom alternator bracket.
From all at “Initracing” we would like to congratulate Shaun Lynn on a well deserved Second place in the Donington Stirling Moss Trophy for pre-61 sportscars race in his Lister Knobbly.
… View Shaun Lynn, Stirling Moss Trophy for pre-61 sportscars. Donington 2013.
Initracing is pleased to announce the release of a new Jaguar 3.8 product. Light weight, high strength cam followers 44 mm diameter. These cam followers are made for us by a company with a high reputation in motorsport. This product like all our products are race proven. We also offer these cam followers with DLC coating which adds further wear resistance as well as anti-friction coating.
… View Jaguar 3.8 light weight cam followers.
An on going problem that has been seen in high output, high revving Lotus Twin Cam engines is a failure of the oil pump casting (see photo below). Here at Initracing we have found that by removing the very heavy cast iron end cover and fitting a light weight end cover has help reduce the mass and frequency of the pump there by reducing the problem.
… View Light weight cover plate for HC Lotus Twin Cam oil pump.
We have been working closely with a company to produce a high quality oil pump for our “Lotus Twin Cam” range of parts which will work with a wet sump type setup. We are now pleased to announce that these pumps are now available with a Tuffrided gear or a bronze type gear. All pumps have an 1″ rotor and an adjustable pressure relief valve. They can be supplied with -10 or -12 fitting for an oil cooler or blanking plates if no oil cooler is being used.
… View All new wet sump oil pump for Lotus Twin Cam.
An exciting new product to our “Lotus Twin cam” range of parts is the front cover with backing plate and water pump insert. There has also been an improvement to the front cover by means of a stiffening rib added to the area where the alternator strap bolts on.
… View Lotus Twin Cam New front cover.
Initracing is please to announce that we are now approved stockiest for WOSP Alternators & Starters. These Alternators & Starters have gained an excellent record of reliability in the motorsport environment.
… View WOSP Alternators & Starters.
We are pleased to announce the release of a billeted lip seal housing for the Jaguar 3.8 lightweight E type. This housing replaces the original rope seal housing with an all new billeted HE15 aluminium housing that takes a modern lip seal.
There are two types available one for the 3.8 lightweight aluminium engine block and one for a 3.8 cast iron engine block.
… View Jaguar lightweight E type rear lip seal housing.